LME:
2.698,07 €
-0,48 %
-13,1100 €
HUF/EUR:
363,72
-0,14 %
-0,5000 Ft
HUENDEROHRSK
Log in |
ACH
LME: 2.698,07 € ↘︎ -0,48 % -13,1100 €
HUF/EUR: 363,72 ↘︎ -0,14 %
Log in
HUENDEROHRSK
EN AW-5083 (AlMg4,5Mn0,7)– cast aluminium plate
Cast aluminium plates

EN AW-5083 (AlMg4,5Mn0,7)– cast aluminium plate

Cast aluminium plate with excellent corrosion resistance, low internal stress and a homogeneous structure. The EN AW-5083 alloy is an ideal choice for precision tooling plates, moulds and mechanical-engineering applications where reliable stability and material integrity are basic requirements.

  • Excellent corrosion resistance – especially in marine and wet environments.
  • Homogeneous structure – a uniform, pore-free material thanks to the casting process.
  • Low internal stress – a stable, dimensionally accurate base even during machining.
  • Good weldability and machinability – reliable behaviour during production.
Alloy grade
EN AW-5083 (AlMg4,5Mn0,7) – cast aluminium
Temper
Cast, stress relieved
Thicknesses
Thickness tolerance: 0/+2 mm (typically +1.5 mm)
Available sizes are listed on the product datasheets.
Format
Plate form, cast surface, prepared for milling.

EN AW-5083 – chemical composition1

(EN 573-3)

Specifications (%)

Remainder: Aluminium

 Others
Si Fe Cu Mn Mg Cr Ni Zn Ti Ga V Notes Each Total2
0,40 0,40 0,10 0,40 - 1,00 4,00 - 4,90 0,05 - 0,25 - 0,25 0,15 - - - 0,05 0,15
1 Chemical specifications are in mass %. Where no range is given, the alloying content is the maximum value.
2 Includes all elements for which no separate limit is specified.
Öntött alumínium vastaglemez
Öntött alumínium vastaglemez
Öntött alumínium vastaglemez
Back to the previous page
Note: We accept no liability or warranty for the correctness, accuracy or completeness of the information and data stated above. Standards and indicative values may change. Agreements are valid as set out in the quotation / order confirmation. We also draw attention to the fact that we accept no liability for colour shades arising during decorative anodising, or for corrosion-resistance results and how they develop. Individual terms may be agreed on a case-by-case basis and must be recorded in writing.